AS 4024.2601-2008
[ Current ]
Safety of machinery, Part 2601: Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles
standard by Standards Australia, 07/28/2008
AS 2805.2-2007 AMDT 1
[ Superseded ]
Electronic funds transfer - Requirements for interfaces - Message structures, format and content
Amendment by Standards Australia, 07/28/2008
AS 1774.29-2008
[ Current ]
Refractories and refractory materials - Physical test methods, Method 29: Cast coverage
standard by Standards Australia, 06/30/2008
AS 4969.11-2008
[ Current ]
Analysis of acid sulfate soil - Dried samples - Methods of test, Method 11: Calculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS)
standard by Standards Australia, 06/30/2008
AS 4969.6-2008
[ Current ]
Analysis of acid sulfate soil - Dried samples - Methods of test, Method 6: Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS)
standard by Standards Australia, 06/30/2008
AS 4969.8-2008
[ Current ]
Analysis of acid sulfate soil - Dried samples - Methods of test, Method 8: Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl)
standard by Standards Australia, 06/30/2008
AS 4969.9-2008
[ Current ]
Analysis of acid sulfate soil - Dried samples - Methods of test, Method 9: Calculation of titratable sulfidic acidity (TSA)
standard by Standards Australia, 06/30/2008
AS 1141.26-2008
[ Pending Revision ]
Methods for sampling and testing aggregates, Method 26: Secondary minerals content in igneous rocks
standard by Standards Australia, 06/30/2008
AS 5200.037.2-2008
[ Current ]
Plumbing and drainage products, Part 037.2: Flow controllers for use with heated or cold water systems
standard by Standards Australia, 06/30/2008
AS 2758.6-2008
[ Pending Revision ]
Aggregates and rock for engineering purposes, Part 6: Guidelines for the specification of armourstone
standard by Standards Australia, 06/30/2008
AS 4123.2-2008
[ Pending Revision ]
Mobile waste containers, Part 2: Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices - Dimensions and design
standard by Standards Australia, 06/30/2008
AS 4123.1-2008
[ Pending Revision ]
Mobile waste containers, Part 1: Containers with two wheels and a capacity up to 400 L for lifting devices - Dimensions and design
standard by Standards Australia, 06/30/2008