IEC 60512-1-100 Ed. 1.0 b:2001
[ Withdrawn ]
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
standard by International Electrotechnical Commission, 01/24/2001
IEC 61851-1 Ed. 1.0 b:2001
[ Withdrawn ]
Electric vehicle conductive charging system - Part 1: General requirements
standard by International Electrotechnical Commission, 01/24/2001
IEC 61518 Ed. 1.0 b:2001
Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
standard by International Electrotechnical Commission, 01/24/2001
IEC 60728-5 Ed. 1.0 b:2001
[ Withdrawn ]
Cabled distribution systems for television and sound signals - Part 5: Headend equipment
standard by International Electrotechnical Commission, 01/24/2001
IEC 60695-2-11 Ed. 1.0 b CORR1:2001
Corrigendum 1 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
Corrigenda by International Electrotechnical Commission, 01/24/2001
IEC 60512-12-7 Ed. 1.0 b:2001
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method
standard by International Electrotechnical Commission, 01/24/2001
IEC 60300-3-10 Ed. 1.0 b:2001
Dependability management - Part 3-10: Application guide - Maintainability
standard by International Electrotechnical Commission, 01/19/2001
IEC 60695-8-1 Ed. 1.0 b:2001
[ Withdrawn ]
Fire hazard testing - Part 8-1: Heat release - General guidance
standard by International Electrotechnical Commission, 01/19/2001
IEC 61334-3-22 Ed. 1.0 b:2001
Distribution automation using distribution line carrier systems - Part 3-22: Mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices
standard by International Electrotechnical Commission, 01/12/2001
IEC 61000-5-7 Ed. 1.0 b:2001
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
standard by International Electrotechnical Commission, 01/12/2001