-
1xFORD WSK-M2P143-A
$15.75 -
1xFORD WSK-M2P155-A
$15.75 -
1xISO 24276:2006/Amd1:2013
$8.55 -
1xFORD WSK-M2P137-A3
$89.55 -
1xAS 5044.1-2010
$50.52 -
1xISO 18098:2013
$20.25 -
1xIEC 60601-2-64 Ed. 1.0...
$142.65 -
1xASTM A472/A472M-23
$24.75 -
1xIEC 61883-6 Ed. 3.0...
$168.75 -
1xUL Subject 651
$74.85 -
1xUL Subject 183
$74.85 -
1xFORD WSS-M1H1016-A2
$15.75 -
1xIEC 61753-031-6 Ed....
$52.65 -
1xIEC 61280-1-4 Ed. 1.0...
$43.65 -
1xIEC 60529 Ed. 2.1 b...
$5.35 -
1xFORD WSK-M2P150-A
$15.75 -
1xFORD WSK-M2P145-A
$15.75 -
1xISO 3534-3:2013
$104.40 -
1xIEC 60746-2 Ed. 2.0...
$73.80
No products
ISO 13856-2:2013
ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
standard by International Organization for Standardization, 04/15/2013
Full Description
ISO 13856-2:2012 establishes general principles and specifies requirements for the design and testing of pressure-sensitive edges and pressure-sensitive bars used as safeguards and not as actuating devices for normal operation.
ISO 13856-2:2012 is applicable to pressure-sensitive edges and pressure-sensitive bars, with or without an external reset facility, used to detect persons or body parts that can be exposed to hazards such as those caused by the moving parts of machines.
It is not applicable to determining the suitability of a pressure-sensitive edge or pressure-sensitive bar for a particular safeguarding application, selection of an appropriate performance level for safety-related parts of control systems (SRP/CSs) other than to give minimum values,dimensioning or configuring of the effective sensing area of pressure-sensitive edges or pressure-sensitive bars in relation to any particular application or to stopping devices according to IEC 60204-1 used only for normal operation, including emergency stopping of machinery.
